Header phone number
Service consultation hotline
QR code at the bottom
Official mobile site
Company Store: F19, Eighth Street, Wuzhou Decoration City, Yingbin Avenue, Panyu District, Guangzhou
Company office address: Room 408, Block B, Wuzhou Decoration City Business Center, Yingbin Avenue, Panyu District, Guangzhou
Contact mobile phone: Miss Zhong 13711569002
Phone: 020-81726130 400-689-1089
Company website: sanqi5.com
- 在许多高级商厦或大厅前，都装有一种能自动开关的门。 Why automatic doors can be opened and closed automatically? Many high-end commercial buildings or halls are equipped with a door that can be opened and closed automatically. When a person walks towards it, the door will automatically open, and when someone enters, it will automatically close again. It's really amazing. How does it know that someone is going in? What force opened the door? In fact, the earliest automatic doors existed 3000 years ago, but they are much more complicated than they are now. In today's scientific development, there are more and more types of automatic doors in Jiangsu, and the structure is becoming simpler. They feel the arrival and departure of people in different ways, and finally they open or close the door by the power of electricity. Everyone knows the more common automatic
- 操作指引■模拟动作 接通电源 自动门以低速、全开行程启 以设定速度关闭 开关动作行程的确认 【注意】接通电源后即进行以上动作，与全开半开元关。 Automatic door operation guide Operation guide ■ Simulation action Turn on the power. The automatic door starts at low speed and full-open stroke. Closes at the set speed. Confirmation of the switch operation stroke. [Note] The above actions will be performed after the power is turned on, and closed with a full-open half-open. ■ Using the half-open mode The door is opened to the half-open position under the first opening detection signal after the simulation action. Confirmation of the half-open position [Caution] When the first opening detection signal is opened and the open state = the confirmed half-open position. If an external force is applied to imitate a person to hit the door, it is easy to confirm the wrong position.
- 一． KABO automatic door installation process ES200 installation and debugging instructions II. Engine case installation First check the horizontality / verticality / error 1/1000 of the bearing steel beam. 2. Install the engine case from both sides of the engine case, and install it at an equal distance of less than 400MM. 3． Clean the engine case. three. Installation position of engine mounting components First determine the door opening width. 2. Engine position. Open the door to the right from the center of the engine case and add 100MM to the engine position. 3． Driven wheel position, the door position is measured from the center of the engine box to the left and 100MM is the driven wheel position. four
- 目前已出现了少数用直线电机传动的平移式电动门，虽然技术较先进，但价格昂贵，安装技术和环境要求都很高，一般不太适宜于露天使用，而且其安全问题仍然没有解决。 How does the automatic swing door operate? At present, there are a few translation type electric doors driven by linear motors. Although the technology is more advanced, it is expensive, the installation technology and environmental requirements are high, and it is generally not suitable for outdoor use. And its security issues remain unresolved. The purpose of the safety swing open electric door is to provide a safety slide door that is particularly suitable for outdoor use and can be braked immediately when it is caught by people or objects. The technical solution of the safety swing-open electric door is: In an electric door system composed of a door, a roller, a motor, a variable speed transmission mechanism, a travel switch, and an electrical control circuit, a transmission rod is installed outside a vertical frame of the door.
Inner page sidebar
Address: Room 408, Block B, Wuzhou Decoration City Business Center, Yingbin Avenue, Panyu District, Guangzhou